Craftsmanship is the quality assurance of the cheap eyeglasses near me frame, and the excellence of a frame's craftsmanship is often reflected in the details. Are the two eyeglasses legs flat? Place the mirror frame flat on the desktop and check if the contact points are suspended.

 

If there is a situation where one side is high and the other side is low between the two mirror legs, it is necessary to adjust the cheap eyeglasses near my legs to achieve a symmetrical effect of left and right balance and up and down.

 

Pay close attention to the welding points of the metal mirror frame and check for cracks. Due to thermal effects during welding that alter the stress structure of the material, virtual welding, material fatigue, etc., it is prone to fracture under stress.

 

The bracket of the mirror frame should pay attention to whether both sides are symmetrical and whether the fixation is safe. Open and close the mirror legs to feel elasticity. The general belief that the tighter the screw, the better is incorrect. This indicates that the lubrication of the screw is insufficient, which can easily cause damage to the mirror legs. If it is too loose, it is not good, and it may be caused by the screw not being tightened. Moderate tightness is optimal.

 

Many cheap eyeglasses near me frames are labeled with frame materials on the legs, especially precious metal frames made of gold and titanium. Let's have a brief understanding of their identification.

 

A gold frame is a mirror frame made by fusing thin gold sheets onto other metal substrates and rolling them together; A gold-plated frame refers to a mirror frame surface made of other metals that is electroplated with gold.